Basement’s  Isolation water proofing

Basement’s Isolation water proofing

Free visit

Basement’s water proofing

Conditions before start :
•    Apply plaster for floor and any block work.

•    Apply cant strip. 

•    All surface must be fully dry .

•    Clear the basements from obstacles. 


Substance-manufactre

Bitumen

Derma bit

Awazel

 

First solution

Polyflame( two layers)

Derma bit 4170

(two layers)

Py40E250(two layers)

Py40E200(two layers)

Second solution

Fiberlon(two layers)

Asphaltoplast

(twolayers)

D.S 40

protection

bitutect

Armo proof

M.S




Note : Alzamil Company recommends choosing the first solution .
 
Work steps :
•    Apply primer paint .

•    Apply first layer of bitumen by 10 cm overlap .

•    Apply second layer of bitumen by 10 cm overlap .

•    Apply bitumen protection board .


Condition after waterproofing:

•    Apply concrete protection thickness at least 5 cm. 

•    Do not fix any nails throw  w.p layers .

•    Do not cut or damage the overlap area in the floor .

•    Must apply reinforced concrete at least 20 cm.

•    Do not fill the water but back field work finished .

•    When start fluid test ,the water level must be less than waterproofing layer .






 water and thermal insulation for tanks and swimming pools

Conditions before start :

•    Aplly plaster for the floor and any block work and cant strip .

•    All surface must be fully dry .

Substance-manufactre

Bitumen

Derma bit

Awazel

 

First solution

Polyflame( two layers)

Derma bit 4170

(two layers)

Py40E250(two layers)

Py40E200(two layers)

Second solution

Fiberlon(two layers)

Asphaltoplast

(twolayers)

D.S 40

protection

bitutect

Armo proof

M.S






Note: Alzamil Company recommends choosing the first solution with any type of protection .

Method of application :

•    Apply primer . 

•    Apply first layer of bitumen by 10 cm overlap .

•    Apply second layer of bitumen by 10 cm overlap .

•    Bitumen protect board .


Condition after waterproofing :

•    Apply concrete protection thickness at least 5 cm .

•    Do not fix any nails thow w.p layers.

•    Do not cut or damage the overlap area in the floor .

•    Must  apply reinforced concrete at least 20 cm .

•    Do not fill water but backfield work finished.

•    When start fluid test must, the water level must be less than the waterproofing layer .


Insulation drawing for basement water proofing :

•    Binding concrete  .

•    Cant strip .

•    Primer .

•    First layer of bitumen by 10 cm overlap . 

•    Second layer of bitumen by 10 cm overlap.

•    Concrete protection.

•    Reinforced concrete .

•    Bitumen protection board .





SURFACE’S INSULATION
Conditions before  start :
•    Clean the surface , cutting steel rods .
•    Light weight foam concrete or plaster layer .
•    Action cant strip 7*7 cm around plaster of the roof .
•    Action threshold for the roof door ..

The water and thermal insulation systems for the roof 


1

Foamy concrete

2

Cant strip

3

Primer

4

Water proofing membrane

 

Polyflame

Derma bit

Py 40E250

Py40E200

Fiberlon

Asphalt blast

D.S

5

Thermal insulation

 

6

Protection for the thermal insulation

7

Slated membrane

8

Aluminum flashing

9

Sealant paste

10

Modern rain filter (two florrs and airing )






Note :  Alzamil Company recommends choosing the first solution .

Method of application :

•    Apply guide lines after 3 days from works start order .

•    Apply light weight concrete (cement / water / electricity ) by client 

•    Starting the foam concrete by water for 3 days .

•    Apply cant strip around the roof.

•    Apply primer for the cant strip.

•    Apply waterproofing by overlap 10 cm lingth and 15 cm width.


Condition after waterproofing :

•    Plumping villas start after the completion  of the waterproofing fluid test for 2 days maximum .

Write a review

Please login or register to review
bookmark