water and thermal insulation for tanks and swimming pools

water and thermal insulation for tanks and swimming pools

water and thermal insulation for tanks and swimming pools

Brand: Al-Zamil
Product Code: Tank insulation
Availability: In Stock
  • 0.00SAR

  • Ex Tax: 0.00SAR

Available Options


Alzamil for the water and thermal insulation for tanks and swimming pools 



Conditions before start :

·       Aplly plaster for the floor and any block work and cant strip .

·       All surface must be fully dry .

 

 

Substance-manufactre

Bitumen

Derma bit

Awazel

 

First solution

Polyflame( two layers)

Derma bit 4170

(two layers)

Py40E250(two layers)

Py40E200(two layers)

Second solution

Fiberlon(two layers)

Asphaltoplast

(twolayers)

D.S 40

protection

bitutect

Armo proof

M.S

 

Note: Alzamil Company recommends choosing the first solution with any type of protection .

 

Method of application :

·       Apply primer .

·       Apply first layer of bitumen by 10 cm overlap .

·       Apply second layer of bitumen by 10 cm overlap .

·       Bitumen protect board .

 

Condition after waterproofing :

·       Apply concrete protection thickness at least 5 cm .

·       Do not fix any nails thow w.p layers.

·       Do not cut or damage the overlap area in the floor .

·       Must  apply reinforced concrete at least 20 cm .

·       Do not fill water but backfield work finished.

·       When start fluid test must, the water level must be less than the waterproofing layer .

 

Insulation drawing for basement water proofing :

·       Binding concrete  .

·       Cant strip .

·       Primer .

·       First layer of bitumen by 10 cm overlap .

·       Second layer of bitumen by 10 cm overlap.

·       Concrete protection.

·       Reinforced concrete .

·       Bitumen protection board .

 

 

 

Write a review

Please login or register to review